Description
If you want to take the full potential out of your 164cc kit it is required you install the 31mm throttle body.
The result is astonishing with increased acceleration and higher top speed.
Fitted with a stainless steel bracket/cable holder for a perfect installation on any PCX125 / 150 or SH125 / 150i. The body is designed to assemble all the original sensors.
For a racing application, the best performance will be achieved without the air filter. For road use, we recommend modifying the stock air filter with Big Tube Air Intake Set 17253-KWN-000.
If the A-type high-performance injector 16450-KWN-001 is installed, it is not necessary to install a special electronic controller as the AFR ratio is perfect.
This throttle body upgrade set can also be installed on:
- SCOOPY-i (2011)
- AIR BLADE i (2011)
- CLICK110i (2011 - 2012)
- WAVE125i / INNOVA125i (2007 - 2014)
Attention: The Throttle Body cannot be installed on your stock manifold. The Yuminashi 17111-KWN-031A manifold for PCX125 is required. For engines eSP 125/150 you must use the B Yuminashi 17111-KZR-000SC manifold.
Valid for models PCX before 2014.
Additional Information
| SKU: | 16410-KWN-031 |
| Homologation: | No |
| Material: | No |
Product Questions
Good for
| Make | Model |
|---|---|
| Make | Model |
| Honda | SH Scoopy 125i inyección LC (2009-2012) |
| Honda | PCX 125cc i LC (10-12) JF28A |
| Honda | PCX 125cc i LC (13-14) JF47A |
| Honda | SH Scoopy 150i inyección LC (desde 2013) |
| Honda | SH Scoopy 125i inyección LC (desde 2013) |
| Honda | SH Scoopy 150i inyección LC (2005-2008) |
| Honda | MSX 125cc |