Kit handlebar and brackets CNC HB28 VOCA Racing - Red

Kit with HB28 handlebar and CNC brackets in red from VOCA Racing.

Handlebar VOCA Racing HB28:

• Resistance, lightness and the VOCA logo in the design.
• Length from tip to tip of 805 mm, with cut lines at both ends to easily cut it at 795 mm and 785 mm.
• The height from the centre of the risers to the ends is 94 mm. The ideal handlebar for all gear bikes and motorcycles in general, with Ø 28.6 risers. If your current handlebar is Ø 22.2, you will need to change the risers or an adapter for Ø28.6 ones to be able to mount this handlebar.
• In the details, we can see the laser markings. In the central part of the handlebar, there are numbered lines to adjust the exact position of the handlebar.
• Large VOCA logos also stand out.
• The aluminium finish is blasted, which gives it a matte touch. But the ends remain polished that the throttle slides correctly. The surface of the left cuff has been knurled (marked) for a proper grip.

Measurements:

• A: 805 mm
• B: 180 mm
• C: 94 mm
• D: 70 mm
• E: 25º
• Diámetro interior 14 mm

Risers VOCA Racing CNC

With these incredible VOCA Racing brackets, you can go from a 22 mm handlebar to a 28 mm reinforced handlebar.

Made of high-quality CNC aluminium, the design is ultra-light and the look is more aggressive without compromising the hardness or reliability. 

The package has two universal brackets that can be assembled on most motorcycles with original fastening Ø22mm.

The kit includes all necessary parts for assembly.

Fastening measurements: M8 screws; Distance between centres from 34.80 mm a 32.20 mm. If you have any questions, contact us at info@motoscoot.net

Attention: On the new models of Rieju MRT PRO, check properly the distance between the centres of the screws.