Polini nozzle, ideal for your Minarelli AM5-6 engine. When increasing the carburettor diameter it is important to change the nozzle.
With this nozzle you get better acceleration and throttle response.
A good intake always gives more power.
WARNING: Only fits carburettors with clamp included, i.e. this nozzle goes into the carburettor, not the other way round! it is for female carburettors
For use in combination with a Polini CP carburettor Ø17,5-19 mm with an internal connection size of Ø24 mm or a Dell'Orto PHBG carburettor Ø17-19 type AS.
Outside diameter 24mm!
Valido para:
Aprilia
MX50 SM H2O 2T E1 2002-2003 (AM6)
MX50 SM H2O 2T E2 2004 (AM6)
RX 50 Enduro H2O 2T 1995-2000 (AM6)
RX 50 Enduro H2O 2T E1 2001-2002 (AM6)
RX 50 Enduro H2O 2T E2 2003-2004 (AM6)
RX 50 Enduro Racing H2O 2T E2 2003 (AM6)
Fantic
Caballero Motard 50 H2O 2T E2 2007-2011 (AM6)
HRD
Sonic SM 50 H2O 2T E1 1999-2003 (AM6)
Sonic Trail 50 H2O 2T E1 1999-2003 (AM6)
MBK
X-Limit Enduro 50 H2O 2T E1 1997-2002 (AM6)
X-Limit SM 50 H2O 2T E2 2002 (AM6)
Yamaha
DT 50 L H2O 2T E2 2002 (AM6)
DT 50 R H2O 2T E1 1997-2002 (AM6)
SKU: | 215.0397 |
Conexión aceite tobera: | No |
Conexión depresor tobera: | Yes |
Ø Conexión tobera/carburador: | 24mm |
Ø Conducto tobera: | No |
1 o 2 piezas?: | 1 Pieza |
Material tobera: | Aluminio |
Ø Exterior mm: | No |
Make | Model |
---|---|
Make | Model |
Aprilia | RX 50cc (AM6) |
Aprilia | MX 50cc (AM6) |
Yamaha | DTR Enduro 50cc (antes '03) AM6 - chasis hierro |
Yamaha | DTX SM 50cc (antes '03) AM6 - chasis hierro |
We request your permission to gather statistics regarding your use of this page, in compliance with the Royal Decree 12/2012. If you continue using this page you agree to the use of cookies. +Info