Recommended
Description
Kit HB28 handlebar with cover and CNC weights in Red from VOCA Racing.
Handlebar VOCA Racing HB28:
- Resistance, lightness and the VOCA logo in the design.
- Length from end to end of 805 mm, with cut lines at both ends to easily cut it at 795 mm and 785 mm.
- The height from the centre of the risers to the ends is 94 mm. The ideal handlebar for all gear bikes and motorcycles in general, with Ø 28.6 risers. If your current handlebar is Ø 22.2, you will need to change the risers or an adapter for Ø28.6 ones to be able to mount this handlebar.
- In the details, we can see the laser markings. In the central part of the handlebar, there are numbered lines to adjust the exact position of the handlebar.
- Large VOCA logos also stand out.
- The aluminium finish is blasted, which gives it a matte touch. But the ends remain polished that the throttle slides correctly. The surface of the left cuff has been knurled (marked) for a proper grip.
Measurements:
- A: 805 mm
- B: 180 mm
- C: 94 mm
- D: 70 mm
- E: 25º
- Inner diameter 14 mm
Handlebar cover HB28 Red
The protector is made of high-density injected foam, that absorbs and reduces the energy of any helmet or body impact. Essential to avoid crashing with the handlebar stems
The lodging to mount the handlebar stems is the widest one in the market, with the distance between them being the longest one, making it universal.
Handlebar Ends VOCA CNC Red
These set of counterweights or also called handlebar ends from VOCA Racing sand out due to the high-quality CNC machining.
Manufactured from an aluminium block to achieve a one-piece design. The logos are laser engraved.
They protect the rubber of the grips from breaks or scratches from small falls or when you lean the motorcycle against a surface.
Assembly is quick and easy:
- Cut a hole on the extremity of the handlebar grip.
- Insert the handlebar end inside the handlebar and tighten the screw until it is fixed.
NOTE: Connection diameter of the counterweight is 13.80 mm. If the handlebar is smaller, it can be machined to allow them to be installed.
Additional Information
| SKU: | B-SD950830970/RE |
| Homologation: | No |
| Material: | No |
Product Questions
Good for
| Make | Model |
|---|---|
| Make | Model |
